1.833.888.0091contact@ehzee.ca

34 results, page 1 of 2.

  1. Guide · Inspections

    Flat roof vs sloped roof inspections

    Flat and sloped roofs keep water out in different ways, so they fail differently and are inspected differently. A sloped roof sheds water quickly with overlapping layers; a flat, or low-slope, roof holds water briefly and relies on a continuous membrane and …

  2. Service · Inspections

    Roof inspections

    A roof inspection tells you how much life your roof has left, where water is getting in or likely to, and what to fix first. We inspect flat commercial roofs and sloped residential roofs, and we look at the roof as part of the building: the attic or ceiling …

  3. Guide · Inspections

    Signs your roof needs an inspection

    Most roofs give warning signs well before they fail: stains on a ceiling, granules in the gutters, ponding on a flat roof, frost in the attic. If you see any of the signs below, or the roof has just been through hail, heavy snow or high wind, have it …

  4. Guide · Inspections

    Roof drains and ponding water

    A flat roof depends on its drains. When drains block or the roof surface sags, water ponds, and ponding water wears membranes faster, finds every weak seam and adds weight to the structure. Keeping drains clear and dealing with persistent ponding are among …

  5. Guide · Inspections

    Snow loads on roofs: when to worry

    Roofs in Canada are designed to carry snow, and most come through normal winters without trouble. The risk rises with unusual conditions: heavy wet snow, rain on snow, deep drifts against walls and equipment, and ice from blocked drains. Knowing where load …

  6. Guide · Inspections

    Ice dams: causes and prevention

    An ice dam is a ridge of ice that forms at the eaves of a sloped roof and traps melting snow behind it. The trapped water backs up under shingles and leaks into walls and ceilings. Ice dams are almost always caused by heat escaping into the attic, so the …

  7. Guide · Inspections

    Attic ventilation and insulation basics

    … frost, mould, ice dams and wet insulation. Why the attic should be cold In a conventional sloped roof with insulation on the attic floor, the attic is meant to be outside the heated space. If it stays close to outdoor temperature, snow on the roof doesn't …

  8. Guide · Inspections

    Thermal imaging in building inspections

    … temperature. In a building inspection, those differences can point to missing insulation, air leaks, hidden moisture, overheating electrical parts and failing mechanical equipment. It does not see through walls, and it does not show moisture or mould …

  9. Guide · Inspections

    How to read a home inspection report

    … this. Scope and limitations: what was inspected, what wasn't, and why. System sections: exterior, roof, structure, attic, heating and cooling, plumbing, electrical, interior and so on. Photographs: each with a caption and a location. Read the limitations …

  10. Guide · Inspections

    Building envelope basics

    The building envelope is everything that separates the inside of a building from the outside: the roof, walls, windows, doors and foundation. Its job is to control four things: liquid water, air, water vapour and heat. Most envelope problems come from a gap …

  11. Guide · Inspections

    What a commercial building inspection covers

    … large costs in the next few years. A tenant wants to know whether the space, its washrooms and its rooftop unit will serve them through the lease. A facility manager wants a baseline to plan maintenance. A lender may want a specific report format. Before …

  12. Guide · Inspections

    Plumbing red flags in an inspection

    … if missed. The biggest red flags are pipe materials with a history of failure, active or past leaks, an old or poorly installed water heater, slow or backing-up drains, and signs of trouble in the sewer line. Most can be confirmed and priced by a licensed …

  13. Guide · Inspections

    Inspecting a commercial space before you lease

    … for HVAC equipment serving the unit, interior plumbing and electrical, and sometimes the roof or structure. Leases often say the tenant takes the premises "as is". Without an inspection, you may inherit a failing rooftop unit, an undersized electrical service …

  14. Service · Inspections

    Commercial building inspections

    … condition of a space before you lease it or hand it back Investigating a recurring problem such as leaks, comfort complaints or tripping breakers Getting an independent view before a renovation, change of use or insurance renewal What we look at Site and …

  15. Guide · Inspections

    An inspection guide for condo buyers

    … maintain directly, but the bigger financial risks are often in the common property, such as the roof, envelope, parkade and mechanical systems, that you will help pay for. A good condo purchase combines an inspection of the unit with a careful review of the …

  16. Guide · Inspections

    Moisture, mould and indoor air

    … so every mould problem is really a moisture problem. Find and fix the source of water, whether a leak, condensation or high humidity, then clean up or remove what has grown. Killing mould without fixing the moisture only means it comes back. How moisture gets …

  17. Guide · Building systems

    How commercial HVAC systems work

    … air, and it moves conditioned air or water to the spaces that need it. Every system, from a single rooftop unit to a central plant with chillers and boilers, is a combination of equipment that does those three jobs, held together by controls. The three jobs: …

  18. Service · Inspections

    Home inspections

    … and drainage, driveways and walks, decks, siding, windows, doors and visible foundation walls. Roof: roofing materials, flashing, chimneys, gutters and downspouts, inspected from the roof where it is safe or from the ground and ladder otherwise. Attic: …

  19. Service · Building systems

    Mechanical system inspections

    … of tenant complaints. Problems such as a failing heat exchanger, a stuck outdoor air damper or a leaking backflow preventer often go unnoticed until something stops working. An independent look, done by people with no equipment to sell, gives you a fair …

  20. Guide · Inspections

    Building a maintenance schedule

    … For each, note the make, model, location, age and who services it. A typical list covers: Roof, drains, flashings and the building envelope. Heating, ventilation and air conditioning: boilers, furnaces, rooftop units, air handlers, fans, controls. Plumbing: …

Not finding it? Ask us or call 1-833-888-0091.